super seal water proof primer

Damp Shield is a reinforced elastomeric water proof coating suitable for exterior surface.

• On Exterior and Interior plastered /puttied surfaces.
• Surface preparation: Fill cracks with crack fill paste (powder. New masonry surfaces must be allowed to cure completely. Typical curing time 30 days. Ensure that surface is completely free from all dirt, loosely held plaster, powdery residue, oil, grease or any other contamination. Remove growth of fungus, algae or moss by vigorous wire brushing and cleaning with water.
• For previously painted Surfaces: Remove all the old paint and loose particles from the surfaces before starting the above process.
• Directions for application: Dilute super seal primer as per the recommended dilution ratio and apply by brush. Give approx 4-6 hrs time between first and second coat. Use desired top coat after 24 hrs (time depends on climatic condition of various places).
• Dilution for normal Application: Priming coat-100% dilution with water.
• Dilution for waterproofing: 1st priming coat-30% dilution with water, followed by 2nd coat-without dilution. Inter coat period should be 4-6 hrs.
• Shake well before use and do not over dilute.